  /**
  @addtogroup ADC_ADC1_DMA_93 ADC_ADC1_DMA for MDR1986VE93 evaluation board
  @latexonly
  @verbatim
  ******************** (C) COPYRIGHT 2024 Milandr ******************************
  * @file    readme.txt
  * @author  Milandr Application Team
  * @version V2.0.1
  * @date    11/04/2023
  * @brief   Description of the ADC_ADC1_DMA Example.
  ******************************************************************************
  * THE PRESENT FIRMWARE IS FOR GUIDANCE ONLY. IT AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING MILANDR'S PRODUCTS IN ORDER TO FACILITATE
  * THE USE AND SAVE TIME. MILANDR SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR A USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN THEIR PRODUCTS.
  ******************************************************************************
  @endverbatim
  @endlatexonly

@par Example Description

This example describes how to use the ADC1 and DMA to transfer continuously converted data from ADC1 to memory. The ADC1 is configured to converts continuously ADC channel31 - Temperature Sensor. Each time an end of conversion occurs the DMA transfers, in ping-pong mode, the converted data from ADC1 RESULT register to the ADC_ConvertedValue[10] array of variables.


@par Directory contains:

    - main.c                        Main program


@par Hardware and Software environment:

  - This example is intended to run on MDR1986VE93 eval board with MDR1986VE93 microcontroller.

@par How to use.

To launch the example, you must do the following:
    - Create a project and setup all project configurations.
    - Add main.c file.
    - Add the required files from "Libraries" folder:
        MDR32F9Qx_config.h
        MDR32F9Qx_rst_clk.c
        MDR32F9Qx_adc.c
        MDR32F9Qx_dma.c
    - Edit the MDR32F9Qx_config.h to set appropriate run-time parameter checking level.
    - Compile and link together all .c files and load your image into the target board.
    - Run the example.

 * <h3><center>&copy; COPYRIGHT 2024 Milandr</center></h3>
 */

